The Story of Nightlights (Don't be left in the dark!)

The nights are getting longer, and with more hours of dark, many of us will use nightlights to chase away shadows and fears of things that go bump in the night.  Before break out your favorite socket torch,  allow us to illuminate you.

Keep reading for a cool How-To at the end of this article!

A nightlight is a small, low-powered electrical light source placed for comfort or convenience in indoor areas that become dark at night.  Sort of a "duh" but just so everyone is clear....

Facts and Figures

• Before they were powered electrically, nightlights were usually long-burning candles placed in fireproof metal cups, known as tealights in some countries. (Tealights in the U.S. refer to very short and wide candles that can be purchased within or without an aluminum tin cup that are commonly used inside a decorative glass holder.  They are also known as votive candles.)
• There are roughly 90 million nightlights purchased each year in the United States. In 2001 alone, more than 600,000 of them were recalled by manufacturers for safety reasons.
• Defective nightlights can cause fires, burns and electrocutions.

  

  This nightlight is the perfect gift for that guy
  in your life who has everything.

Uses

Nightlights are typically installed to create a sense of security and to alleviate fears of the dark, especially for children. They also illuminate the general layout of a room without causing the eyestrain created by a standard light, helping to prevent tripping down stairs or over objects. This is an important safety measure for older adults, for whom falls are the leading cause of injury-related deaths, according to the National Association for Home Care and Hospice. Nightlights may also be used to mark an emergency exit.

Types

A wide variety of nightlights is available to homeowners; bulbs vary from incandescent to energy-efficient options, such as light-emitting diodes (LEDs), neon lamps, and electroluminescent bulbs. Some of these devices are equipped with a light-sensitive switch that activates the light only when it’s dark enough for them to be required, saving electricity and the effort needed to manually turn them on and off. Some designs also incorporate a rechargeable battery so they will continue to function during power outages.

This one is guaranteed to keep the kids hiding safely under
their covers all night!

Nightlights present the following hazards:

• fire. Nightlights can become excessively hot, causing them to melt and pose a risk of fire if they come in contact with flammable materials, according to the U.S. Consumer Product Safety Commission (CPSC). The CPSC receives roughly 10 reports annually of fires that were caused when nightlights ignited toilet paper, pillows, bedspreads and other flammable materials. In many of these cases, the nightlight was installed so close to the bed that falling blankets or pillows made contact with the nightlight and started a fire. For this reason, nightlights should not be plugged in next to bed coverings, curtains, and other potentially flammable objects and materials. InterNACHI inspectors can also make sure nightlights are not covered with tape, cardboard or any other material that might cause them to overheat. Homeowners may consider using nightlights equipped with mini neon bulbs instead of higher-wattage bulbs;
• poisoning. So-called “bubble" nightlights are special, decorative nightlights that contain a dangerous chemical called methylene chloride. If the vial breaks, the unit should be thrown away immediately and precautions should be taken to avoid skin contact with the leaking chemical; and
• electric shock. Nightlights pose the risk of electric shock when used outdoors or in locations that may become wet, such near sinks or hot tubs, or in garages or covered patios. They should never be plugged into an extension cord, surge-protector strip, multiple-outlet strip, or other movable types of receptacles. Electric shock is also possible if the nightlight overheats and melts.

The following are a few of the many nightlight models that have been recalled due to electrical and fire hazards:

• Molenaar™ brand, model numbers 2017 and 2019 that are shaped like a rectangle and a house, respectively, and include the etched engraving "71980 U.S.A": 315,000 units recalled; 
• Forever-Glo™: 35,000 units recalled;
• LED Rocketship PalPODzzz™ Portable Nightlights:  26,000 units recalled; and 
• Energizer™ Light-on-Demand Wallplate Nightlights: 3,000 units recalled.

Additional Tips

• Plug the nightlight into an exposed wall outlet where it will be well-ventilated.
• Do not repair any nightlight yourself.  Only replace the bulb.
• Avoid installing nightlights in locations where they might be exposed to excessive sunlight, as UV rays will degrade the plastic.

·         Never let children handle nightlights. If you have small children, avoid purchasing or installing a nightlight decorated with cute or funny figures to which they may be attracted and that may be easy for them to reach.

Nightlights are used for comfort and safety, although homeowners should take precautions when purchasing and using these devices.

Like this nightlight?

Me too!  Here's how to make it:  

http://www.treehugger.com/slideshows/gadgets/make-LED-night-light-faucet/

Remodeling Always Makes Financial Sense...NOT

With a large number of homes for sale, many at amazingly low prices, investors are heading back in to the real estate market, and some adventurous first time investors are testing the waters.  With so many shows on the Discovery and HGTV, flipping is becoming trendy again, but do your research.  Remodeling can dramatically increase the quality of life for building occupants, but if you are considering a remodel strictly as an investment, think twice about it.

Remodeling is rarely a sound monetary investment.

According to a report published by Remodeling Magazine, most remodeling projects add only 60% to 80% of their cost to the home, and no projects, on average, yield any positive return. Home upgrades are thus more accurately described as consumer spending than as true investments, which ordinarily have a decent chance of seeing some kind of profit.

Source: Remodeling Magazine, 2008
Project	% of Cost  Recouped in Resale
deck addition	81.8%
minor kitchen remodel	79.5%
bathroom remodel	70.7%
master suite addition	66%
home office addition	54.6%

As the report deals only with averages, it is still possible for individual remodeling projects to yield positive returns. A wooden deck added to a mid-range house on the Pacific coast, for instance, will add more value than the construction costs nearly half of the time. Even the most wasteful of the projects analyzed by the study, such as the addition of a sunroom or a backup power generator, are bound to reap a profit in rare instances. Also, remodeling projects are more likely to be profitable in houses that are inexpensive for their neighborhood. But, by and large, remodeling projects should be undertaken to improve quality of life for household occupants, not strictly as monetary investments. While you will lose more than a third of what you put into a family room addition, for instance, maybe your family will enjoy the addition enough to more than counter its expense.

Remodeling is also a cheap alternative to house-swapping, which can cost 10% of your current house's value to real estate commissions, moving costs, and selling expenses. If your home update would cost less than the costs accrued by house-swapping, or if you can’t live outside your current neighborhood, the remodeling project might be worthwhile. If you do choose to remodel your house, as always, have the project inspected by an InterNACHI inspector.

Remodeling Mistakes

If you are committed to remodeling in order to add resale value to your home, avoid the following mistakes:

• upgrading your house in any way that will make it bigger or fancier than most others in your neighborhood, as such remodels are unlikely to add much value;
• adding pools or spas, as they repel as many buyers as they attract, in most markets. These upgrades often require maintenance that buyers don’t want to hassle with, and they pose a drowning risk to young children. Ask your InterNACHI inspector during your next inspection about remodeling projects that prospective buyers may find dangerous.
• indulging in your personal tastes rather than aiming to please prospective buyers. Bold statements, such as brightly colored appliances, will repel many buyers.
• trusting TV shows that are based on the premise that remodeling is a true monetary investment. These shows are successful if people watch them, not if their claims are based in reality. Buying anything at retail cost and hoping to resell it at a profit – especially in the future, when the item or project has become dated – is rarely a winning financial strategy.
  

Low-Cost Alternatives to Remodeling

Real estate agents often recommend the following fixes, as they are likely to return more than their cost:

• Refurbish rather than replace. Refinishing or re-facing cabinets is usually less expensive than it costs to replace them. Re-glaze sinks and tubs to extend their lives and avoid the high price of replacing them.
• Rethink how you use space. While adding floor space may seem like a reasonable way to deal with a space crunch, you can probably achieve the same result by ditching the clutter. An off-site storage unit can be used to free up space in your house.
• Re-purpose a room. Never use the guest bedroom? Maybe you can turn it into an office or a dining room instead.
• Paint. Paint can transform the look of a room or house, and it is inexpensive and relatively easy to apply. Hire a professional or do it yourself.
• Brighten the house by removing heavy curtains, washing windows, and trimming back branches and bushes that cover windows.
• Deep-clean. Scour your house from top to bottom.
• Clean up landscaping. Trim bushes and hedges, rake leaves, clear downed branches, plant flowers and replace mulch.
• Use staging techniques. Rearrange furniture and décor to highlight the positive aspects of the room and create an inviting space. While you can do this one your own, professional staging services are contracted to tweak color and furniture to create an emotional appeal. Consider that a large segment of prospective home buyers will preview homes on the Internet, and staging can dramatically enhance a first impression.
  
  

In summary, remodeling is often a bad investment strategy, and inexpensive alternatives may achieve the same end.

10 Easy Ways to Save Energy in Your Home

Most people don’t know how easy it is to make their homes run on less energy, and we want to change that. Drastic reductions in heating, cooling and electricity costs can be accomplished through very simple changes, most of which homeowners can do themselves. 

Why make your home more energy efficient? Here are a few good reasons:

• Federal, state, utility and local jurisdictions' financial incentives, such as tax breaks, are very advantageous for homeowners in most parts of the U.S.
• It saves money. It costs less to power a home that has been converted to be more energy-efficient.
• It increases the comfort level indoors.
• It reduces our impact on climate change. Many scientists now believe that excessive energy consumption contributes significantly to global warming.
• It reduces pollution. Conventional power production introduces pollutants that find their way into the air, soil and water supplies.

1. Find better ways to heat and cool your house. 

As much as half of the energy used in homes goes toward heating and cooling. The following are a few ways that energy bills can be reduced through adjustments to the heating and cooling systems:

• Install a ceiling fan. Ceiling fans can be used in place of air conditioners, which require a large amount of energy.
• Periodically replace air filters in air conditioners and heaters.
• Set thermostats to an appropriate temperature. Specifically, they should be turned down at night and when no one is home. In most homes, about 2% of the heating bill will be saved for each degree that the thermostat is lowered for at least eight hours each day. Turning down the thermostat from 75° F to 70° F, for example, saves about 10% on heating costs.
• Install a programmable thermostat. A programmable thermostat saves money by allowing heating and cooling appliances to be automatically turned down during times that no one is home and at night. Programmable thermostats contain no mercury and, in some climate zones, can save up to $150 per year in energy costs.
• Install a wood stove or a pellet stove. These are more efficient sources of heat than furnaces.
• At night, curtains drawn over windows will better insulate the room.

2. Install a tankless water heater.

Demand-type water heaters (tankless or instantaneous) provide hot water only as it is needed. They don't produce the standby energy losses associated with traditional storage water heaters, which will save on energy costs. Tankless water heaters heat water directly without the use of a storage tank. When a hot water tap is turned on, cold water travels through a pipe into the unit. A gas burner or an electric element heats the water. As a result, demand water heaters deliver a constant supply of hot water. You don't need to wait for a storage tank to fill up with enough hot water.

3. Replace incandescent lights.

The average household dedicates 11% of its energy budget to lighting. Traditional incandescent lights convert approximately only 10% of the energy they consume into light, while the rest becomes heat. The use of new lighting technologies, such as light-emitting diodes (LEDs) and compact fluorescent lamps (CFLs), can reduce the energy use required by lighting by 50% to 75%. Advances in lighting controls offer further energy savings by reducing the amount of time that lights are on but not being used. Here are some facts about CFLs and LEDs:

• CFLs use 75% less energy and last about 10 times longer than traditional incandescent bulbs.
• LEDs last even longer than CFLs and consume less energy.
• LEDs have no moving parts and, unlike CFLs, they contain no mercury.

4. Seal and insulate your home.

Sealing and insulating your home is one of the most cost-effective ways to make a home more comfortable and energy-efficient, and you can do it yourself. A tightly sealed home can improve comfort and indoor air quality while reducing utility bills. An InterNACHI energy auditor can assess  leakage in the building envelope and recommend fixes that will dramatically increase comfort and energy savings.

The following are some common places where leakage may occur:

• electrical receptacles/outlets;
• mail slots;
• around pipes and wires;
• wall- or window-mounted air conditioners;
• attic hatches;
• fireplace dampers;
• inadequate weatherstripping around doors;
• baseboards;
• window frames; and
• switch plates.

Because hot air rises, air leaks are most likely to occur in the attic. Homeowners can perform a variety of repairs and maintenance to their attics that save them money on cooling and heating, such as: 

• Plug the large holes. Locations in the attic where leakage is most likely to be the greatest are where walls meet the attic floor, behind and under attic knee walls, and in dropped-ceiling areas.
• Seal the small holes. You can easily do this by looking for areas where the insulation is darkened. Darkened insulation is a result of dusty interior air being filtered by insulation before leaking through small holes in the building envelope. In cold weather, you may see frosty areas in the insulation caused by warm, moist air condensing and then freezing as it hits the cold attic air. In warmer weather, you’ll find water staining in these same areas. Use expanding foam or caulk to seal the openings around plumbing vent pipes and electrical wires. Cover the areas with insulation after the caulk is dry.
• Seal up the attic access panel with weatherstripping. You can cut a piece of fiberglass or rigid foamboard insulation in the same size as the attic hatch and glue it to the back of the attic access panel. If you have pull-down attic stairs or an attic door, these should be sealed in a similar manner.

5. Install efficient showerheads and toilets.

The following systems can be installed to conserve water usage in homes:

• low-flow showerheads. They are available in different flow rates, and some have a pause button which shuts off the water while the bather lathers up;
• low-flow toilets. Toilets consume 30% to 40% of the total water used in homes, making them the biggest water users. Replacing an older 3.5-gallon toilet with a modern, low-flow 1.6-gallon toilet can reduce usage an average of 2 gallons-per-flush (GPF), saving 12,000 gallons of water per year. Low-flow toilets usually have "1.6 GPF" marked on the bowl behind the seat or inside the tank;
• vacuum-assist toilets. This type of toilet has a vacuum chamber that uses a siphon action to suck air from the trap beneath the bowl, allowing it to quickly fill with water to clear waste. Vacuum-assist toilets are relatively quiet; and
• dual-flush toilets. Dual-flush toilets have been used in Europe and Australia for years and are now gaining in popularity in the U.S. Dual-flush toilets let you choose between a 1-gallon (or less) flush for liquid waste, and a 1.6-gallon flush for solid waste. Dual-flush 1.6-GPF toilets reduce water consumption by an additional 30%.

6. Use appliances and electronics responsibly.

Appliances and electronics account for about 20% of household energy bills in a typical U.S. home. The following are tips that will reduce the required energy of electronics and appliances:

• Refrigerators and freezers should not be located near the stove, dishwasher or heat vents, or exposed to direct sunlight. Exposure to warm areas will force them to use more energy to remain cool.  
• Computers should be shut off when not in use. If unattended computers must be left on, their monitors should be shut off. According to some studies, computers account for approximately 3% of all energy consumption in the United States.
• Use efficient ENERGY STAR-rated appliances and electronics. These devices, approved by the U.S. Department of Energy and the Environmental Protection Agency’s ENERGY STAR Program, include TVs, home theater systems, DVD players, CD players, receivers, speakers, and more. According to the EPA, if just 10% of homes used energy-efficient appliances, it would reduce carbon emissions by the equivalent of 1.7 million acres of trees.
• Chargers, such as those used for laptops and cell phones, consume energy when they are plugged in. When they are not connected to electronics, chargers should be unplugged.
• Laptop computers consume considerably less electricity than desktop computers.

7. Install daylighting as an alternative to electrical lighting.

Daylighting is the practice of using natural light to illuminate the home's interior. It can be achieved using the following approaches:

• skylights. It’s important that they be double-pane or they may not be cost-effective. Flashing skylights correctly is key to avoiding leaks;
• light shelves. Light shelves are passive devices designed to bounce light deep into a building. They may be interior or exterior. Light shelves can introduce light into a space up to 2½ times the distance from the floor to the top of the window, and advanced light shelves may introduce four times that amount;
• clerestory windows.  Clerestory windows are short, wide windows set high on the wall. Protected from the summer sun by the roof overhang, they allow winter sun to shine through for natural lighting and warmth; and 
• light tubes.  Light tubes use a special lens designed to amplify low-level light and reduce light intensity from the midday sun. Sunlight is channeled through a tube coated with a highly reflective material, and then enters the living space through a diffuser designed to distribute light evenly.

8. Insulate windows and doors.

About one-third of the home's total heat loss usually occurs through windows and doors. The following are ways to reduce energy lost through windows and doors:

• Seal all window edges and cracks with rope caulk. This is the cheapest and simplest option.
• Windows can be weatherstripped with a special lining that is inserted between the window and the frame. For doors, apply weatherstripping around the whole perimeter to ensure a tight seal when they're closed. Install quality door sweeps on the bottom of the doors, if they aren't already in place.
• Install storm windows at windows with only single panes. A removable glass frame can be installed over an existing window.
• If existing windows have rotted or damaged wood, cracked glass, missing putty, poorly fitting sashes, or locks that don't work, they should be repaired or replaced.

9. Cook smart.

An enormous amount of energy is wasted while cooking. The following recommendations and statistics illustrate less wasteful ways of cooking:

• Convection ovens are more efficient that conventional ovens. They use fans to force hot air to circulate more evenly, thereby allowing food to be cooked at a lower temperature. Convection ovens use approximately 20% less electricity than conventional ovens.
• Microwave ovens consume approximately 80% less energy than conventional ovens.
• Pans should be placed on the matching size heating element or flame. 
• Using lids on pots and pans will heat food more quickly than cooking in uncovered pots and pans.
• Pressure cookers reduce cooking time dramatically.
• When using conventional ovens, food should be placed on the top rack. The top rack is hotter and will cook food faster. 

10. Change the way you do laundry.

• Do not use the medium setting on your washer. Wait until you have a full load of clothes, as the medium setting saves less than half of the water and energy used for a full load.
• Avoid using high-temperature settings when clothes are not very soiled. Water that is 140° F uses far more energy than 103° F for the warm-water setting, but 140° F isn’t that much more effective for getting clothes clean.
• Clean the lint trap every time before you use the dryer. Not only is excess lint a fire hazard, but it will prolong the amount of time required for your clothes to dry.
• If possible, air-dry your clothes on lines and racks.
• Spin-dry or wring clothes out before putting them into a dryer. 

Homeowners who take the initiative to make these changes usually discover that the energy savings are more than worth the effort.  Your wallet will thank you.  The planet will thank you.